Architecture

Why Is A Cool Basement Often Damp In The Summer, Why Is My Basement Wet In The Summer

This page briefly describes moisture sources, moisture movement mechanisms and typical basement moisture problems. Then, a step-by-step process for addressing each problem is presented along with several detailed approaches to solving the problem.

You are watching: Why is a cool basement often damp in the summer

*

A problem that can damage your health and home

Moisture problems in existing basements are very common, but often are not understood or properly treated. In a basement that is seldom used and separate from the living spaces above, this may not present a great problem. However, most basements in Minnesota are connected to the rest of the house through ductwork or other openings. In addition, basements are increasingly used as finished living and bedroom spaces. In these cases, moisture problems are not only annoying and uncomfortable, but can lead to significant health problems. Molds and mildew can grow in damp carpets and beneath wall coverings. Finishing a basement without first dealing with the moisture problems can result in making health conditions worse and lead to significant damage as well. Basement water problems are solvable, but there is a cost to doing it right.

Understanding the problem

To correct basement moisture problems, it”s necessary to understand where the water is coming from and what mechanisms permit it to enter the basement. There are just three sources of moisture:

Liquid water from rain or ground-water.Interior moisture sources such as humidifiers, unvented clothes dryers, bathrooms and cooking, as well as the moisture in concrete after construction.Exterior humid air that enters the basement and condenses on cooler surfaces.

Moisture is transferred from the outside of the building to the basement interior by four mechanisms:

Liquid water flow.Capillary suction.Vapor diffusion.Air movement.

Sometimes problems are traced to poor construction with cracking, settling foundations. In many cases, however, houses and basements can be structurally sound but are often not properly built to handle water drainage. Failure to slope the ground surface away from the foundation or lack of a good gutter and downspout system is common. Missing or nonfunctioning subsurface drainage systems are also found relatively frequently. These problems can all be addressed and corrected if a systematic approach is used.

See more: Blessed Is He Who Expects Nothing, For He Shall, Blessed Is He Who Expects Nothing, For He Shall

This page briefly describes moisture sources, moisture movement mechanisms and typical basement moisture problems. Then, a step-by-step process for addressing each problem is presented along with several detailed approaches to solving the problem.

Symptoms

Water trickling out of walls.Standing water on floor.Saturated base of concrete block walls; a ring of dampness.Damp, humid air.Condensation on cold walls and floor in summer.Odor, mold and mildew.Deterioration of carpet or wood.Rot and decay of wood headers, joists, sill plates and colnadechworld.coms.Staining and blistering of wall covering.Efflorescence, spalling of concrete or masonry.

Basement moisture sources

*

Rain and groundwater

Rain and groundwater

In a 1-inch rain, 1,250 gallons of water fall on the roof of a 2,000-square-foot house. Without proper grading, gutters and downspouts, some of this water flows into the basement. The below-grade water table can also rise due to flooding or seasonal site conditions. This is why drain tile systems are recommended around basement walls even in sandy or gravel soils.

*

Interior moisture sources

Interior moisture sources

Moisture is generated inside of basements from people and their activities. Common sources are humidifiers, unvented clothes dryers, showering and cooking. When basements are finished, these activities increase.

See more: Sandisk Extreme Plus Vs Samsung Evo Plus, The Best Microsd Cards For 2021

Another source that can be thought of as internal is the moisture contained in new concrete after construction. In a typical house, this can amount to 0.2 gallons per square foot of wall, and 0.1 gallons per square foot of floor. It may take many months or even years for a new house to come into equilibrium with its environment.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button