ELEGOO Saturn 2 8K 3D Printer, MSLA UV Resin Printer with 10 inch Monochrome LCD, Air Purifier and Screen Protector, 219x123x250mm Larger Printing Size

Product Information

Before any version could be put into production, work on all Saturn variants was stopped in favor of launching all future payloads from the Space Shuttle. As manufacturers develop these printers, they are rapidly adding new features to make them easier to use and more accessible to the average person and the new Saturn 2 is no exception. This configuration was dropped when it was determined that the HG-3-SL could not compete with the J-2 in terms of overall performance, reliability, and cost-effectiveness. Elegoo has been in the resin 3D printer business for the past few years and has produced several different sizes ranging from small printers like the recent Elegoo Mars 3, which has a 4K resolution, all the way up to the new Elegoo Jupiter, with a 6K resolution. The hole will mostly help you out when washing and cleaning your model as most excess resin will leave the model as it is printed.

All of this means that you use Saturn 2 for everything from sweetening a mix bus through to guitar amp simulation. The Saturn INT-18 would have used the standard S-II with J-2 engines, augmented by two or four Titan SRBs. Thanks to the high resolution of 7680 x 4320, all the finer points of a 3D object are also visible on the printed model. Placing models at an angle makes it much easier to remove them from the build platform without damage in the process. The current version at the time of this writing already has the Saturn 2 as an option, making setup a breeze.The UA1204 and UA1207 boosters were considered, with the highest total impulse configuration using four UA1207 boosters, capable of placing 146,000 pounds (66,000kg) of payload into low Earth orbit. Another design variable was the amount of the full 1,005,500 pounds (456,100kg) propellant load carried in the S-II, and 241,300 pounds (109,500kg) in the S-IVB stage. The reduced payload permitted a savings of 660 pounds (300kg) in structural weight, and omitting the S-IVB restart capability saved 1,500 pounds (700kg).

If you want something with a smaller footprint and you like Elegoo, you may consider going with the Elegoo Mars 3. After printing, the model will still likely have some leftover resin on it and, to get a resin print to look its best, you will want to clean it. It also has a feature to allow you to add drain holes so that you can rinse out any excess resin from inside the head.

Even though the port is shaped like a standard USB port, it has a warning next to it that the output voltage is 24 volts instead of the usual 5 volts produced by USB ports, so you wouldn’t want to plug your USB memory stick into it. He lives by the sea in West Cornwall where he plays piano, bass and guitar equally badly and is an avid collector of microphones and opinions about all things audio.

In addition to having a larger screen, it is also a significantly higher resolution then either of its two predecessors. Martin Marietta (builder of Atlas and Titan rockets), Boeing (builder of S-IC first stages), and North American Aviation (builder of the S-II second stage) were three of the companies that provided responses. After that, I dipped it in water briefly and used the brush included with the water washable resin to loosen up any more resin residue.This would allow closing down Chrysler Space Division production lines for the S-IB first stage, and would allow for more efficient integration of rocket systems. The huge build volume of this MSLA-3D printer makes it possible to print detailed, large-format objects.

North American studied three versions with the S-IC first stage removed: the INT-17, a two-stage vehicle with a low Earth orbit payload capability of 47,000 pounds (21,000kg); the INT-18, which added Titan UA1204 or UA1207 strap-on solid rocket boosters, with payloads ranging from 47,000 pounds (21,000kg) to 146,400 pounds (66,400kg); and the INT-19, using solid boosters derived from the Minuteman missile first stage. The vehicle had a LEO payload capability of 92,000 pounds (42,000kg) with a gross weight of 1,112,000 pounds (504,000kg).

With its multiband design and per-band feedback, dynamics, drive, tone and modulation options, Saturn 2 will bring a unique flavor to your music. support for Avid control surfaces, GPU-powered graphics acceleration, extensive help with interactive help hints, SSE optimization, and much more. Even though the LCD is scratch resistant, you will still want to be extremely careful if you did have any resin cure there, which is why it is best to avoid it in the first place. The Elegoo Saturn 2 is driven by a pair of linear rails along with a nice thick lead screw for a very sturdy build platform, which is necessary to produce detailed prints at such a high resolution. Like the number in its name suggests, the new Elegoo Saturn 2 is the latest iteration of their Elegoo Saturn line of resin 3D printers and comes with quite a few improvements.