Yonico 14705 1/2-Inch Height with 6 Bearings Rabbet Router Bit & Bearing Set 1/2-Inch Shank

Product Information

Router bits are designed to serve three primary functions: To create wood joints, to plunge into the center of a piece for grooves or inlays, and to shape the edges of wood. As with chamfer bits, it’s generally used on the edges of shelves, tabletop and cabinet edges the arms of chairs and any other area that requires a smooth edge.

However their main purpose is for creating decorative edges commonly used on tables, doors of various types, shelves and the similar. After all, most folks follow the standard protocol: on the tablesaw with a dado head buried in a sacrificial fence. A secondary fence made from a strip of MDF lets you expose only as much blade as you want without damaging your rip fence. What I would like to do, though, is (realising that I must bite the bullet for building some jig / sled type thing) build myself a crosscut sled so I bought some 18mm plywood last night, and some wood for the runners and some for the fences.com/p/Yonico-Rabbet-with-6-Bearing-1-4-in-Shank-Carbide-Tipped-Router-Bit-14705q/304970771" on this server. Using markings on the end of his ruler, Latta adjusts the fence to set the width of the rabbet (below left), and clamps the second end in place. This innovative stepped rebate router bit cuts a double-step on the back of picture and mirror frames in a single pass for holding the glass and a backing piece. The one drawback that straight cut bits tend to have is that they are generally unguided meaning you have to use a guide of some kind to ensure a straight and accurate cut or have a very steady hand!

Very similar to a chamfer cutting bit, the rounding over router bit is generally used to round off sharp and acute edges to leave a nice smooth and rounded one.

As you may have guessed from the shape of the bit in the image below, the core cutting bit cuts channels and shapes with a concave bottom.