Emergency lighting test keys **Engineers pack** Emergency Light Test Keys X5

Product Information

The test switch is a safe way to cause a permanent mains failure to the emergency fittings for both the monthly function test and annual duration test.

Emergency Lighting Key for Testing Emergency Lights - Safelincs

You only need to establish "Do the emergency lights come on in a power failure" (Which as you said is done by operating the EL test switch) you do not need to turn "normal" lights off plunging the place into potential darkness unnecessarily. Emergency lighting key switches, also known as secret key switches, are designed to allow the testing of emergency lighting easily whilst ensuring non-authorised personnel cannot tamper with the light switch. So whether you are looking for wireless fire alarm systems, wired fire alarms, a sealed lead acid battery or fire extinguishers, you are sure to find the perfect fire safety product for your needs with us here at The Safety Centre. So without knowing further information it is not possible to suggest where test switches should be located.Emergency escape lighting provides illumination for people who need to exit a building in an emergency, such as a fire or a power cut. It is this commitment to first class equipment that has made us one of the leading providers of fire alarms and other safety equipment. Due to emergency light systems being so important in the process of protecting building occupants and highlighting escape routes and firefighting equipment, it is essential that emergency escape lighting is regularly tested and maintained to ensure that in the event of a failure of mains power, the lighting works correctly and escape routes are effectively illuminated (escape route lighting). The FRA is based on risk assessment so what are the chances are for the premises to be involved in fire at the same time of a power cut depriving you of supply to the whole area. Fire extinguishers are a must-have on any commercial or industrial site, so it is important that you purchase effective and reliable extinguishers.

Plus 20A Secret Key Switch Module - Toolstation MK Grid Plus 20A Secret Key Switch Module - Toolstation

These tests may be performed by technicians during a fire alarm service, as this can be done while waiting for the lamps to complete the duration of test. The latest British Standard recommends that you have a 3 hour emergency lighting test once a year, during which your main light circuit should be switched off and your emergency lights left on for a 3 hour period to find out of any batteries need replacing. I have an electrician telling me I have to have a key switch to turn off and test an emergency light, and your page on emergency lighting indicates, that if it is not possible for decor reasons, or as we already have a single trip switch on a panel that only switches the light in question,and is a locked cupboard, your page suggests I don't need key switches, the electrcian says if we don't have the key switch we won't conform to BS 5266.This advice and guidance article provides advice on how often you should get your emergency lighting tested, and how to test your emergency lighting. The results of all testing and any necessary corrective action can be recorded in your fire safety logbook. The frequency in which you should get your emergency lighting tested can vary depending on system type (i. In such circumstances, high risk task lighting will be required and designed in such a way to ensure illumination is maintained as long as the local hazard continues to exist.

Emergency Lighting Test Key Set - Discount Fire Supplies Emergency Lighting Test Key Set - Discount Fire Supplies

I was just wondering wether or not on new emergency light installations wether or not a keyswitch has to be installed by every new emergency light?So the test can be carried out during working hours (some safety critical areas might require a different routine! Emergency light test key switches are ideal to allow the safe testing of emergency light fittings without the need to isolate a full supply circuit from the mains distribution board.