Dell U2715H 27-Inch Widescreen IPS LED Monitor

Product Information

style stands of some older UltraSharp models including the U2713HM, and comes in an all-silver colour. A: Yes, when using DUCCS software with the UltraSharp, you will always want to determine if you wish to save to the Calibration 1 or Calibration 2 preset.

A: GB LED is the specific illumination hardware that is used by the UltraSharp. This is automatically selected when the software recognizes the UltraSharp is in use. Many other displays use other lighting technologies, such as White LED. GB LED illumination offers many technical advantages in rendering more accurate color on-screen. A: Keep in mind that your DELL requires approximately 60 minutes to stabilize for best color results. The DELL has both DisplayPort (DP) and High Definition Multimedia Interface (HDMI) inputs. Keep in mind that you may see different results due to cabling and input method. box the screen used 28.5W at the default 50% brightness setting. Once calibrated the screen reached starts. All in all, it's still only a 6.9mm edge around the image which looks very nice in practice and should beHere they have factory calibrated the default 'Standard' preset mode to a 2.2 gamma, 6500k white point and with a When comparing two different displays, you need to ensure both use the same color temperature, luminance, gamma, and contrast settings at a minimum. The screen’s colour accuracy was outstanding, as our colour calibrator showed it was already displaying 100% of the sRGB colour gamut at its default settings. With such a perfect score, we had no need to calibrate it, and its colour coverage was incredibly deep across red, green and blue colour spaces. This is one of the few screens we’ve seen that doesn’t require colour calibration out of the box, and it even performs well in wider-ranging colour gamuts, managing 99.5% of Adobe RGB, too. A: The DUCCS software is based on i1Profiler technology. But please use the DUCCS software to access the hardware color controls to achieve best results. Use of i1Profiler is possible, but not optimal. A: Although we would like it if you owned more than one DELL branded display, you can use the DUCCS software with a non-DELL display.

ICC profiles and gamma corrections. The screen was tested at default factory settings using the DVI interface, and analysed using A: If you are using two displays, setting them to the same luminance level is critical if you wish to see similar color results. Display color temperature changes with the luminance level set, so establishing a common luminance setting is an important step in making displays look more similar. When a device is first used, it is a normal reaction to use that configuration as a reference standard. (Like the first time you hear a song sung, you compare all versions to that version.) It is impossible to avoid some degree of comparison between two examples of an image on two separate displays, and due to the factors already mentioned. It can be challenging to make two dissimilar displays look "identical." The best option is to use displays that are as close to identical as possible to result in nearly identical visual appearance. A: Yes. Owners of X-Rite i1PRO2 and i1Pro spectrophotometers can also use this program for display calibration.good, and you could tell it was a standard gamut screen. We went ahead and measured the default state with A: Many design creative users want to use the full color gamut possible on the UltraSharp, and do not require that the display correspond to any industry specification. Alternately, the UltraSharp offers the ability to be set for use with industry color space descriptions such as AdobeRGB and Rec. 709. Your specific choice varies depending on your needs. graphics card LUT from the profilation of the screen which was pleasing. You can use our settings and A: DUCCS is supported and fully tested on Windows 7, 8, and 10. DUCCS is supported and fully tested on MacOS 10.8, 10.9, 10.10, 10.11, and 10.12. There is no current ETA for support on newer versions of MacOS.

subtract half of the average G2G response time from the total display lag. This should allow us to give a good estimation of colorimeter with a central point on the screen calibrated to 120 cd/m 2. Measurements for colour temperature (white point) were taken using

Q: In the Licensing area on the home screen, the last four icons have a red question mark. What is wrong? Note: These FAQs assume that the owner of a DELL UltraSharp monitor can use the menu options and physical controls of the display. normal operation and pulsates on/off white when the screen is on standby. Unlike some of the other UltraSharp screens we've seen A: The Automatic Display Control (ADC) feature can take a number of minutes with the UltraSharp, due to the complete control of the hardware offered. The current version of the software does not have a cancel button available until the ADC feature completes. We would recommend that you allow the ADC process to complete to avoid having the display end up in an unstable color condition.