Target Darts Corona Vision Dartboard Lighting System

Product Information

Some features like Lightweight of the lighting set, 360° non-glare illumination, Double injected moulded frame, Robust aluminum front cover, giving protection to the surrounding wall, etc. can enhance your light up dart board efficiency. Tips and Useful Information Regarding the Dartboard Lights Thefirst thing is that you will not invest your money for an ugly (!) product. Isn’t it? Yes, we are naturally prone not to buy an ordinary faced product. It’s not at the top of most people’s shopping list but good dartboard lighting can be the difference between enjoying the game or being frustrated at not seeing exactly what you’ve hit. For this reason, we’re going to cover the best dartboard lighting options in this article so that you can choose a lighting solution that suits your setup. Since ‘Target Darts’ has introduced the use of a LED light both Unicorn Dart and WInmau have followed suit. Again, both have adopted a similar approach with a ring of LED to light the dartboard. The difference is easily noticeable as all numbers are well light, regardless of ambient or natural lighting in the room. Just keep in mind that the replacement strips are on the expensive side so be careful of stray darts or accidental damage.

Dart Board Lighting | Darts Corner Dartboard Lights | Dart Board Lighting | Darts Corner

Designed exclusively for the WISPA sound proofing system, the Wispa 120 degree light proved zero shadow with the brightest possible light at 1200 lumens warm white effect. This robust lightweight aluminium light features the easy fit with intuitive magnetic design. If your project turns out like mine, my edges were far from perfect and I had to do a lot of sanding to get all of the edges even and smooth. So, don't worry if your cuts were a little off. Just keep sanding and sooner or later you'll get them all even and smooth. Most may not have the opportunity of seeing all three of these dartboard lights together. Four if you add the ‘Circumluminator’ so it can be hard to judge what is the best for you. Coverage – This dartboard light being an arc means it covers the top half much better than the bottom half of the board.

What has changed?

I don't have a perfect approach to recommend here. For me, I eyeballed it and simply used an razor blade knife to carefully cut the un-needed outer edge excess off so that the foam would fit snugly inside the dart light project. You can also customise your dart light surround to a colour of your choice with a Mission Torus Cascade Colour Light Strip. This unique replacement light strip will allow you to choose from 12 different colours for your darts light ring. Using a staggered but even distribution of a few spotlights can reduce the dart shadow but won’t fully eliminate it as a 360-degree lighting system will. However, for most home uses, pubs and clubs this seems to be the least expensive and acceptable method of lighting the dartboard playing surface.

Dartboard Lighting - Darts-UK - PDC World Matchplay

The HONWELL lighting system consists of low voltage LEDs, which makes it one of the most energy-efficient lighting systems.

The HONWELL lighting system comes with a two-spotlight setup, which is used for lighting picture frames. However, it’s also a great option to illuminate your dartboard. Target's Corona Vision Dartboard Lighting System is almost too good to be true. The four arms that hold the light fixture to the board have strong magnets that securely hold the light. It is perfectly designed to fit a standard sized board. I tried it on my old board that measured 18.5" in diameter and it worked fine and it also fits my new board that is 17.75" in diameter. The light covers the board 360 degrees and is very bright - but not too bright. The light ring is designed so that the LED lights are aimed at the board and you can not see the LEDs from the line where you throw the darts so there is no light glaring at you as you aim your darts. The transformer with a 5 foot long cord is included. About 18" from where the cord plugs into the light fixture is a easy to use switch for turning the light on and off. Installation is simple and took less than 5 minutes and did not require any tools or mechanical know-how. Installation – Many users are not fond of the adhesive strip so opt to screw it into place instead. The Unicorn Solar Flare Dartboard lightacts as a light ring around your dartboard, offering 360-degrees of illumination. Now have your friend hold the Dart Light up against the wall again and align the 4 holes with the wall anchors.

DARTBOARD LIGHTS | The Darts Shack

The Viper Shadow is incredibly easy to mount. It requires four screws to be held in place and a simple process of marking the holes, creating a pilot hole and screwing in for fast and easy installation. In case you don't already know, for proper play, it really matters at what height you mount a dart board. The center of the bullseye must be exactly 5' 8" from the ground and the line you throw from is 7' 9.25" away from the face of the dart board. Target Darts has launched a new LED ARC lighting system that attaches to the top of a darts cabinet. Powered by an electric mains adaptor, this light is easy to install and gives a clear, bright white light without the need for a halo ring. I can easily see why this lighting system will appeal to most players, clubs, and pubs worldwide. Dartboard lights are an important component of the setup though and you have quite a few options when it comes to lighting a dartboard:

2 People Made This Project!

The Plasma Lighting System gives you 360-degree illumination. In terms of the construction of this lighting system, it is made of aluminum, which strengthens it and keeps it lightweight.