Joined in 2023 
82 
63 About this deal
Is currently able to meet a large number of “End User” requirements, and offers even greater potential: You can do this via UV sterilisation, cold water sterilisation, steam sterilisation or in a dishwasher. Never steam sterilise in a microwave. How does it work? It’s easy-peasy! Boil fresh water, measure formula powder, fill RapidCool with hot water, add formula powder, and mix well. Simply wait for the digital display to show a green Nuby logo and dispense the feed into your sterilised baby bottle. A 120ml feed will be ready to serve in only 2 minutes*. No cold-water baths to cool a bottle down, no having to reheat a made-up bottle, no worrying about making a feed correctly. Just a safe feed to NHS guidelines, day, night, or out and about. No, you don’t have to wait! The freshly boiled water can and should be used immediately for the safest feed. The NHS guidelines state that the water should be no less than 70°C, but this does not mean that you must wait for it to reach this temperature first before mixing with formula. Mixing formula with freshly boiled water is the safest way to feed, as it ensures any harmful bacteria are eliminated! The RapidCool™ works by absorbing heat from hot liquids. After being exposed to heat, it will require a minimum of 3 hours before being ready to use again. The flask should feel cool to the touch.
Easy to use: Add the formula to your baby’s bottle, press the power button to release a hot shot of 70°C water that kills any bacteria in the formula, shake then press the button again to dispense cooler water This is novel, efficient, easy to maintain, safe, hygienic and cost effective to produce. The system is capable of coping with the loads of the system, and can be easily adapted to suit different capacity machines. This has not only been demonstrated within the project, but further development outside of the project has already begun to produce a more compact system for domestic use. Validate of energy usage of prototype. To achieve an overall energy saving equivalent to >60-80% of vending machine energy consumption (for refrigeration)Highly recommend the following method. This is what I do and I have the night feed made up in less than a minute. Agreements are already in place to set-up future production of the system, and a family of related products has already begun to form targeting domestic use in addition to commercial/ retail use. The developments have already resulted in 2 granted patents with a further 2 pending. These have been filed throughout the world based on the broad global appeal of the technology. Meet the most innovative way of preparing formula feeds with the NEW RapidCool™ formula feeding kit that cools down your formula milk to optimum temperature in just 2 minutes* to NHS guidelines! Just WOW.
Use with tap water: There is no need to use bottled or filtered water; Our antibacterial filter, with internal filtration membrane, removes bacteria, impurities and contaminants DAY AND NIGHT - For a fast, quiet night feed keep the RapidCool to hand, along with the filled milk powder dispenser and the insulated flask of freshly boiled water. When your baby wakes in the night, you’re ready to feed in just 2 minutes without a trip to the kitchen.Saves energy costs: The Perfect Prep machine delivers a fresh formula feed at body temperature in just two minutes! That’s 10x faster and 17x less electricity than a kettle* Two separate control systems were developed. Initially the development of a control regime led to the development of a control algorithm which would “intelligently” implement the optimum cooling regime based on a number of parameters such as temperature, materials, volumes etc... As a result of this work a patent was filled based on the controlled cooling process. The first control system was based on a single can system, and a further “multi-can “control system was developed with additional features. For example this would not only operate automatically during normal, consumer use, but would enter into an alternative operating state during low periods of demand.
The major benefit of this approach was to save energy, an increasingly prominent aim and especially important since commercial refrigeration accounts for over 6% of total energy consumption in the services sector. Consequently it was also felt that the technology could yield strong cost benefits. However these aims should not get in the way of consumer needs. Consumers have become accustomed to drinks, chilled to the “right” temperature, and with almost instant availability. So Rapidcool had to be fast and cool repeatedly. Strategic partnerships have successfully been formed with a number of leading white goods manufacturers who will lead on the development and set up for manufacture of the system during the next stages of development. They have the knowledge experience and importantly the capacity to meet the anticipated demand for such a product which could become common place in a number of environments. It is anticipated that set-up and manufacture of the system could generate additional jobs in addition to revenue. Multi-Can - Simultaneously cooling of small batches to achieve even faster vend times, and satisfy higher demand: Just been told I shouldn't use a prep machine for bottle feeding (having some tummy issues and difficulty settling after a feed) Utilising water as a cooling medium, the project was able to cool consistent and Rapidly. The optimum results vary depending on the type of product and container used. However for a typical 330ml can of soft drink the Rapidcool prototype consistently cooled in under 50s. The concept of achieving this is based on the generation and disruption of a vortex through spinning the beverage at high speeds. However the ultimate attainment of such a fast cooling rate was based on careful optimisation; the development resulted in a number of inventive steps which have now been patented. In short the developments resulted in an optimised process which combines, water submersion, spinning at optimised speeds, supplementary motions and cycle interruption.We recommend that the feed is used immediately (as soon as the Nuby light turns green and indicates the feed has cooled sufficiently), as per the NHS guidelines. Is able to cool a single can from room temperature to 4 degree in under 50s – beating other known technologies. Easy to clean and maintain: Clear warning lights prompt you to either run a cleaning cycle, descaling cycle or when it’s time to change your filter, for simple and fuss-free bottle feeding Simple: Add the formula to your baby’s bottle, press the power button to release a hot shot of 70°C water that kills any bacteria in the formula, shake then press the button again to dispense cooler water
Great Deal 
New Comment