Festool Cordless Table Saw CSC SYS 50 EBI-Basic

Product Information

At the end of the day the Systainer hood securely clips in place over the saw, allowing easy transportation and protection. Highly precise rip fence: Robust rip fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results

Angled cuts from -2° to 47° (-10° possible at limited cutting depths of 21 - 32 mm) thanks to the pivoting saw bladeFlexible undercarriage: The UG-CSC-SYS undercarriage is the perfect transport solution for the place of use and the ideal work table in one ( Optional ) Versatile: Parallel cuts up to 11" (280 mm); cross cut width of up to 17-3/4" (450 mm). Bevel cuts from -2° to 47°

Absolutely judder-free: Ball bearing-mounted slide for parallel and angled cuts with maximum precision. Compact and mobile: transportable with one hand in the practical Systainer format. Even easier with the UG-CSC-SYS undercarriage. Practical: At a cutting height of up to 35 mm, through to angled cuts right down to -10°; ideal for undercutting infill panels. Extreme precision: The height and angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimetre. The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. As enormously handy as its external dimensions are, the saw presents itself surprisingly versatile in use: with parallel cuts of up to 280 mm, a cross-cut width of up to 450 mm and angled cuts of -2° to 47°. In the process, the unique digital control delivers highly precise results down to the tenth millimeter. The 2x18 volt dual-battery system combined with the brushless EC-TEC motor impresses with full power and pulling power. You won't notice any difference from mains-powered machines. Together with the UG-CSC-SYS undercarriage, you have the perfect work table right away, and transporting it from the vehicle to the place of use is effortless. In short: Sawing precision to go! Special featuresHighly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70°. Flexible underframe: The UG-CSC-SYS underframe is the perfect solution for transport to the point of use and the ideal worktable in one Extreme precision: The height and bevel angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimeter (1/256") The 2x18 V dual battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won't notice any difference compared with mains-powered machines.

Better with a system: The Systainer³ is compatible with and can be attached to all previous Systainer generations, mobile dust extractors and many more system accessories Exact height and angle adjustment by means of electric stepper motors. Can be set precisely to 0.1 mm and controllable via a display Work matched to material: With saw blades for every material the speed selection for material matched speed is done via the digital display

Technical Specification:

Highly precise angles: The miter gauge is optimally aligned and centrally clamped via a groove on the sliding table. For miter angles between -70° and +70°

Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display. Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display Mitre angles from -70° to +70°:The angle can be optimally adjusted via the exact scale; predefined catches also make selecting the most important angles easier. Make parallel cuts of up to 280 mm, cross-cut widths of up to 450 mm and angled cuts of -2° to 47°. The unique digital operation produces results with maximum precision, down to accuracies within a tenth of a millimetre.Exact height and angle adjustment by means of electric stepper motors. Adjustable to an accuracy of 0.1 mm and adjustable via display Angled cuts from -2° to 47°:Angled cuts from -2° to 47°; at a cutting height of up to 35 mm, even down to -10°.