Drayton 25478 LP711 (Mk4) 1 Channel Timeswitch

Product Information

On the controller, navigate to ‘signal strength’ through the settings on the screen. On the thermostat, press and hold the + and – buttons for five seconds, then navigate to signal strength The miGenie thermostat and miGenie gateway are pre-bound to the miGenie controller so they just need to be positioned in the best place for wireless communication. To help with this, there is a built-in signal strength indicator. A home’s general temperature can be set to 21˚C, but installers can use TRVs to control the temperature in certain rooms, for example where part of a home has been developed to incorporate a ‘granny flat.’ Step by Step - Installing miGenie

For example, if a householder understands when their heating is due to come on and when it is scheduled to be off, as well as how to alter the time settings, then they should be able to manage their system timings without your assistance. When taking a digital thermostat from a cold van and installing it in a warm home, you should be aware that it won’t respond instantaneously. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. The thermostat can be mounted to the stand or to the wall clip in a location where it will be able to control the room temperature. When wall mounting, the thermostat should be placed around 1.2m (4ft) off the ground and away from windows and radiators.Thermostatic radiator valves (TRVs) are an important part of the central heating system, as they allow householders to control the temperature of each individual room through the radiator. The miGenie gateway is designed to be placed on a flat surface and should be located next to the customer’s internet router. This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons.

Attach the TRV head, making sure that the indicator is facing forwards. This is easiest to do if you screw the valve on when it is set to maximum, before reducing the setting to 3 once installed.The receiver unit should be positioned 300mm away from any metal objects such as the boiler or a microwave or any large obstructions like solid walls that will affect the signal being sent from the transmitter to the receiver. Replacing a timeswitch with a wireless programmable thermostat Finally, if the additional requirement for heat is likely to be regular, they can re-programme their control to include a new time period.