Mayhems - PC Coolant - Ultra Pure H2O - High Purity, Low Electrical Conductivity, 1 Litre

Product Information

All our products are designed and managed from start to finish, using only the best base materials available, and all done in house. This means we have complete control over quality and choice available. Research and development are all done within the company and nothing is released until it has gone through an extensive test, sometimes over long periods of time.>/p> If you use our support @ www.mayhems.net we will replace any fluids and request samples of tubing and fluids which we cover all the costs for (if you have an issue, use our direct support so we can help you to help others and catalogue any issues found and any fixes). The formulation can be adjusted in house to accumulated sub-zero cooling and various other forms of cooling and is scalable beyond anything we have done in the past. Mayhems Blitz Complete kit is the most comprehensive cleaning kit ever released for liquid cooling computers. It has been developed to clean your radiators better than new and leave your system in perfect condition.

Mayhems Blitz Part 1 Radiator Cleaner excels in eliminating the oxidation, surface rust, and mineral scale deposits found inside new and used radiators alike. It is the first step in achieving the ultimate clean your loop deserves. The primochill tubing (clouding issue) we found the issue to be capillary action of the tubing, Primochill sell a similar based product (coolant) they say works how ever under heavy testing we found the same issue with there own coolant. So again draw your own conclusions from this. Every 1 to 2 years empty the coolant out of the system and pour through a paper coffee filter to remove any debris. Flush the system through with ultra-Pure H20 and empty out. Re-add Mayhems XTR Premixed topping up with extra Mayhems XTR if needs be.We are both part of the liquid cooling community and have been for an untold number of years, and we believe that our products reflect the enthusiasm that we have for our end users and their projects. EK-CRYOFUEL Concentrate: 2.5-5 % Sodium 2-ethylhexanoate, <0.02 % Methylisothiazolinone, 0.1-1% Methyl-1H-benzotriazole We have fully tested Acrylic, Primochill, our flexible and XSPC tubing up to 60c with clean rads. We found no issue with XT-1, we have sold in excess of 10,000 Ltrs of this fluid over 5 years. In that time have received a total of 6 products sent to us and in each and every case found the Rad to be the issue. The the cloudy coating on tubing contained flux, due none cleaning (or not good enough cleaning) of the rads. The spectral analysis of the white powdery residue was tested though an external agency so that we could clarify the issues found, you can draw your own conclusions on this. Due to the issues found we ended up creating the " Mayhems Blitz Cleaning" system to solve Rad cleaning issues. If you spill Mayhems XTR clean it up immediately with a damp cloth and then dry surrounding area with dry cloth. Never leave the fluid to dry out in a system. Mayhems New XT-1 Nuke is a new coolant with a higher grade biocide, surfactants and inhibitors and is a totally diffrent beast with a much higher heat carrying capability and longer lasting.

Mayhems XTR is fully made in the UK using some of the most advance techniques and industrial processes ever seen to create such a product and is truly unique.I think to say that there is no biocide or inhibitor in the XTR is a bit of a strange statement since you then say that the zinc oxide is in fact the biocide and part inhibitor. Your post mentions "living biocides" which I am going to assume you mean organic biocide (i.e. based on carbon compounds) and that you mean that since zinc oxide is your biocide, this is an inorganic biocide. As biocides naturally are designed to terminate the living, "living biocides" is a bit of an oxymoron. Now whether Zinc oxide which is an insoluble compound (I assume this is also the main component that gives the XTR an opaque look) I guess one will see how that plays out for the effectiveness as an active component of the coolant. Lastly, whether zinc oxide is a good corrosion inhibitor I also suppose we will see, but this sounds somewhat similar to the sacrificial zinc coating on thermaltake radiators that had a certain reputation. The system must be fully cleaned using the Mayhems blitz cleaning system. There must be no other coolants left in the system.

Thus provided that the fluid is passing through the system without clogs, the only thing about a coolant is whether it protects the system from growth and corrosion. Like with any computer component, it is important to know the technical specs of anything you want in your system. The Mayhems Blitz range was designed, developed, and tested using Mayhems Ultra Pure H2O, as a result, we advise using our H2O for the diluting and flushing stages. Phobya ZuperZero Clear: 25-30% Ethylene Glycol, <1% Sodium 2-EthylHexanoate , <1% disodium tetraborate pentahydrate Mayhems Blitz Part 2 System Cleaner is a single part highly effective cleaning system for liquid cooling loops. Mayhems Blitz System kit is a whole system flush that will not only clean the system it can improve the overall performance of your system. Mayhems XTR has been developed from the ground up over several years in conjunction with UK universities and Nanomaterial scaleup manufacturers in the UK. Its is a cumulation of new high-end nanomaterial advancement and manufacturing and has taken years of work to get to a where it is now. Unlike any other coolant in our industry, it contains no Glycols and no living Biocide or Inhibitor.

Kids Definition

Mayhems Inhibitor + works with the dirtiest of radiators, however they can reduce its life span. You can top up Mayhems Inhibitor + and not worry about how much you use in a system. Be warned though the dirtier your radiator the more detritus it will suspend in your system, so as per the norm it’s best to clean your radiators and system using the Mayhems Blitz Complete kit before use. Mayhems X1 Eco is our most environmentally friendly coolant. It is therefore recommended for use in systems where an ‘environmentally friendly’ product is preferred. Coolant concentrate can be diluted down to your own unique ratio to adjust boiling and freezing point of the finished coolant