Official Girl Guides Uniform Polo Shirt

Product Information

Cut the vinyl using the "Holographic Vinyl" setting with "More" Pressure, shiny side down on a green StandardGrip machine mat. All girls should have a uniform top or the uniform dress. Uniform tops can be worn with any bottoms that suit the occasion or activity. If you make a project using a T-shirt ruler guide, I’d love to see it! Please share your projects in my Cricut Crafters & Makers group where you’ll find hundreds of thousands of crafters like you, sharing their tips, projects, and inspiration. Iron-on vinyl – I used Cricut Everday Iron-On in yellow, and Holographic Iron-On in red and cobalt. Now, don’t worry if the curve of your T-shirt ruler does not exactly match the curve of your seam. There may be a little extra space. So long as it is centered, it does not matter.

We don't need to change any operations, because I'm going to use the fine-point blade to "engrave" the markings and cut the ruler shape at the same time, but only want the markings to be surface deep. I found it easier to double up on the ruler outline cut rather than fiddling with pressure settings, multiple cuts, and cuts turning out misaligned. Use your EasyPress or iron to put a little crease on the center fold. When you open your shirt you’ll know exactly where the center is. Now you can just line up the center of the ruler with the crease to get perfect placement! Guides have flexibility with what they wear as uniform. They often agree on their uniform guidelines together with other girls in the unit. What Guides wear NOTE: The T-shirt rulers are already sized correctly so you do not have to worry about re-sizing. The Adult rulers should be approx. 5" H x 10.39"W, and the Youth/Toddler/Infant rulers should be 10" W x 4.5" H. A way to cut your T-shirt rulers and vinyl. I used the amazing Cricut Maker 3 but you can also use the original Maker or an Explore series machine with the Fine-Point BladeInterest badges, awards and skills builders -Guides can choose where they would like to put badges on their uniform top or dress. When the cut is finished, don't remove the mat! First, gently lift up a corner to make sure the ruler's shape is completely cut out. If not, press the "Go" button to repeat the cut process. It should go all the way through now. Remember, place the vinyl against the t-shirt so the shiny carrier sheet is between the design and your EasyPress or iron. It's a bit hard to tell, but there is a smooth side and a rough side to the mats. Since I want the "engraved" texture to be on the underside of my ruler, I'll feel for the smooth side and place the smooth side down on my purple StrongGrip Machine Mat and use a brayer to make sure it's fully adhered. The excess will hang off the end but that won't hurt anything. But if you might need to see the fabric’s surface during alignment — like if you’re using a patterned shirt— or plan to make A LOT of shirts, the chopping mat version is easier to make than you might think and extremely durable. It actually just takes a fine-point blade and StrongGrip mat!

TIP: Putting a crease in your shirt like this also serves to pre-heat the material. It won’t impact the final design at all. Preheat your EasyPress or iron to the proper temperature.The guide calls for me to set my EasyPress 2 to 330°F. If you are using an iron and cotton t-shirt, set it to the cotton setting. If your shirt is something other than cotton, you may need a different setting for your material. The best size really depends on the garment and design, but I have handy references for the maximum recommended sizes in the printable tutorial. Find the vertical center of your shirt. The simplest way to do this is to fold your shirt in half by matching up your sleeves. The chopping mats are 11" x 14" but I’m going to place them on 12" x 12" mats with the excess hanging off the edge. So on the Prepare screen, leave the Material Size at 12" x 12", but make sure the ruler shape doesn’t go past the 11" mark to the right, since there won’t be material to cut over there.Remove the ruler, being careful not to shift the design. Your T-shirt and decal are now perfectly aligned! Place your t-shirt face up on a Cricut EasyPress Mat or folded towel to protect your work surface. Use a lint roller to clean any stray lint or fuzz from the area of your shirt where you plan to adhere the vinyl. An appropriate heat press – I used my EasyPress 2, but you can use another Cricut heat press, or a home iron. Have a towel or pressing mat and a lint roller ready, too. Of course, you can always go a bit smaller than this, but this is the typical sizing of shirt decals that we’re all used to seeing. If you go too much smaller, your decal will be hard to see and hard to weed. Union flag badge-this badge should be worn at international events,on the left shoulder of the uniform top.