HG Mould Spray, Effective Mould Spray & Mildew Cleaner, Removes Mouldy Stains From Walls, Tiles, Silicone Seals & More - 500ml

Product Information

Unsightly and unwanted, mould is like the proverbial bad penny – just when you think you’ve got rid of it, another spot appears… or it did before HG Mould Remover. So many of our customers wouldn’t trust anything else, and Grace Harvey – a longstanding customer from Belfast – is one of its biggest fans. Installing loft and cavity wall insulation and draught-proofing windows and exterior doors can help keep your home warmer and means reduced energy bills too. Simply spritz the product onto the problem area, allow it to dry and then wipe clean for almost instant results. In more serious mould cases, you might need to repeat the process to see true results. The spray also sanitises surfaces, minimising the chance of mould regrowth. Ensure the doors of the affected rooms are kept shut to limit the spread of moisture around your home. If you can’t put them in a sealed container or cupboard, at least squeeze them out thoroughly so they’re relatively dry. 4. Keep the bathroom clean

Run the extractor while showering or bathing and up to thirty minutes afterwards to be most effective, ensuring the bathroom door is closed to prevent the moist air circulating throughout the house.

10. Best mould remover for silicone:

There are more than 100,000 documented species of mould, and they are categorised into three ‘classes’ based on risk. Using a dehumidifier: Dr Andy Whittamore, an in-house GP at Asthma UK, says, “Some people find that dehumidifiers help to dry the air and prevent damp and mould. But you must get the setting right, or they can leave the air too dry and make you cough.” Dehumidifiers can remove excess moisture in the air, which can help stop mould from spreading and ultimately prevent it from returning. Moisture meters ( hygrometers) can be bought easily and cheaply from hardware shops or online, and are a good way to monitor and control the moisture levels in your home and detect potential problem areas. Aim to keep humidity levels below 60% if possible. Keep your home warm How regularly will I use the product? A milder product would be more suitable if you plan to incorporate it into your regular cleaning routine, while a high-strength remover is more suited to occasional scrubbing. Mould can cause many problems in our homes and can also cause a potentially serious health risk, particularly for those suffering from allergies or asthma.

Apply the mould removal product to the area. Leave it on for the product’s specified amount of time: this can vary from a few minutes to up to half an hour. Who else is in your household? For example, some products might not be suitable for homes with fish tanks. If you have young children or pets, you might prefer to use a product that’s non-toxic.Moisture in the bathroom is a bigger problem when it condenses as water on cold surfaces, which can be alleviated by keeping the room well heated. If you prefer to take a gentler approach towards your household cleaning, there are mould remover products out there to match. EcoZone’s non-toxic mould remover is free from bleach and can be used on a wide range of surfaces including grout, sealant and window sills. If you want to prevent mould, you need to keep your home as warm, particularly in colder weather. Cold air can’t hold moisture as well as warm air, and therefore condenses on cold surfaces and mould begins to grow.