FLSUN QQ-S 90% Pre-assembled Delta 3d Printer Printing Size Φ255X360mm Lattice glass platform Auto Leveling Touch Screen

Product Information

Fast: the FLSUN QQ-S – though default settings are around 60mm/s – can become one of the fastest 3D printers around. Delta 3D printers are known for their speed due to differing extruder builds and weights. Additionally, it is taller than most printers, it being specified at 360mm (most have over 370mm clearance). Below mentioned are some of the most important parameters that you need to have a glance at before buying this 3D printer. The simplest way to describe the Flsun QQ-S Pro is by saying it’s a larger, faster version of the Flsun Q5.

FLSUN QQ-S Pro is fully made of stainless steel which permits very little wobbling and therefore more accurate 3D printing. However, the practical test with the original MKS firmware reveals considerable weaknesses here at higher printing speeds. Already from 80 mm/s onwards, the firmware apparently no longer keeps up with the calculation of the movements. This manifests itself in jerks and later also in large holes in the walls, since the filament flow is not stable when the firmware repeatedly stops the movements of all motors briefly. The Flsun V400 is the best Flsun 3D printer for you if you have the budget, and prioritize speed and size. It’s also ideal if you want to print TPU and flexibles with the better retraction offered by the direct drive extruder. From March 28th to May 9th, the pre-sale of SR printer has officially ended, thanks to the support of 3D printing users to FLSUN and SR printer. Comes with pre-installed models on a microSD card for those who want to get going straight away and don’t have a laptop handy with Cura.With an upgraded build volume and 32-bit motherboard, the QQ-S Pro is ideal if you want to work on larger 3D printing projects, and don’t want to sacrifice detail for size. The higher print speed than the Q5 will suit you if you’re the impatient type. If everything is connected and you have the correct Wifi data you should be able to see Disconnect instead of Connect. This allows the bowden tube to be less than 12" (30cm) long. # Optical Endstops # QQ-S (Pro) easy cheap The extrusion quantities in the extrusion test are not necessarily stable, but our measurements here can also only reflect the real behavior of the extruder to a limited extent. Due to the long PTFE hose from the extruder to the hotend, it takes time for the filament to build up a corresponding pressure in the nozzle. Thus, especially at the beginning and at the end of the individual extrusions of the Anycubic PLA filament, you can see that it takes some time until a stable filament flow is achieved. Based on the results, we can estimate that with an extrusion width of 0.44 mm and a layer height of 0.2 mm, a printing speed of 120 mm/s should be possible without making any adjustments. FLSUN QQ-S pro is equipped with filament detection, and turns-off automatically after the completion of 3D printing a part or functional prototypes. These qualities make it a perfect 3D printer for use at offices and at homes.

Additionally, you also get very few warping issues to deal with while printing with 3D printing materials like ABS. While the maximum print speed of 300mm/s is a great feature, these high speeds tend to lead to less detailed prints. In this case, you’ll be happy to know that the Flsun QQ-S Pro still produces high-quality prints even at around 100mm/s. This is much faster than the average FDM printer in this price range. You can set it up to run multiple boards on a single printer (if you have a ton of steppers and/or extruders) Moreover, having a lattice 3D print bed also means that there’d hardly be any bed adhesion issues in FLSUN QQ-S Pro during the printing or after the part is 3D printed and it is time to take it off the bed. And this is something that will make you relate to Anycubic Ultrabase. The Gen L board has a version of Marlin 1.x on it, modified by FLSun. # QQ-S/Q5: It has 2 firmwares: Robin Mini (Q5:Nano) board, Wifi board (if equipped)Whereas the QQ-S Pro keeps good print accuracy and surface finishes up to around 100mm/s, the Super Racer can print well at up to 150mm/s. That’s not to say that the Q5 it’s basic, far from it. Few FDM printers offer this speed and quality at such a low price, especially with automatic bed leveling. the configuration file like you do in Marlin. You can even edit the configuration file on the web interface and hit a button to reset the printer and instantly load the new configuration. This makes the tuning process much more efficient. If the appearance bothers you, one easy fix is to get a Buildtak, PEI sheet, or other print surface to cover the entire bed with. # The printer screen comes on when plugged into USB: Yes, assuming you are using Marlin firmware and not using the wifi module. See https://www.youtube.com/watch?v=7ShcFKXrVHo (opens new window) for the Q5. QQ-S is similar.

When reassembling, first assemble loosely, then push the bowden tube all the way in, then heat and tighten last bit Noise: Though it says it is is quiet, the printer’s machine noises on reaching certain coordinates can still be fairly loud. It would be difficult for most makers to concentrate on work or another pastime while the FLSUN QQ-S prints in the same room. Next, we tried a larger Pokemon model, of a Venonat. This took around 2 hours, and came out looking crisp and well defined, even in the antennae and top spikes which are printed vertically with no supports. There were small amounts of stringing but this is to be expected in this situation. We printed it with supports, but turned on its side the model could probably have been smoother. Again, this does not reflect on the FLSUN QQ-S, but on our haste. The programs of the song and dance conference are all original works of employees of various departments, presented in four types: "Small Piece", "Song", "Dance" and "Crosstalk". The melodious singing, cheerful dance, humorous sketches, and humorous cross talk will show the self-style vividly and vividly. Not only that but also printing with HIPS and flexible filaments with support materials would be possible.

Power

And then the nozzle moves 0.15 mm above the first layer to print another one. And the same process is repeated until you get the complete part or functional prototype.