SilverStone FX500, 500W Flex-ATX 80 PLUS Gold power supply, SST-FX500-G

Product Information

What I have in mind is to duct a 120 mm (i.e. large diameter, low max RPM) centrifugal blower, mounted next to (rather than on top) of the PSU. This (I hope) would allow me to keep the build within the 40 mm height, while reducing the noise. The geometry of a centrifugal blower (i.e. small diam output) seems adapted well for coupling into the (small-diam) 40 mm input of the original 1U PSU fan. I need to make sure that the PSU controls the new beefier fan as if it was its native one (high RPMs based on load, shut-off if the fan fails etc). Though they offer Noctua fans which I heard in another reddit post that it didn't had the proper air flow.

EDIT Updates 20/12/2020: Been using it for 1 week. No problems so far. Really quiet no audible coil whine and low fan noise. It runs cool with my Ryzen 1800X + 1060 during my long gaming sessions, my previous Delta 400W PSU made the bottom of my case really warm. Huge improvement and pleased with the performance so far. EDIT Updates 18/04/2021: Working well so far. Very quiet and cool, seems like my CPU exhaust is hotter than the PSU exhaust, maybe coz my rig is not pushing it hard (1800X+1060). For those who are keen but unable to get from Taobao, I have added the Aliexpress link above. EDIT Updates 08/02/2022: Working as per normal, for those who are asking. Have been daily driving the CAT-7760B with my 1800X+1060 combo in my 5L< computer. https://www.reddit.com/r/sffpc/comments/kb9nw3/absolutely_gorgeous/ FSP's modular flex ATX power supply features an innovative mechanical design. They not only include most modular options on the market but all the Flex ATX models are available in standard direct output and modular cable configurations. One reason why the power supply is a must is because of its modular design which improves the ease of use. One benefit of using this particular power supply is that you can configure your power cables according to the needs of the system you’re using.FSP500-50FDB: The FSP500-50FDB is an industrial level of switching power supply and certified to perform with 80PLUS Gold efficiency. It comes to offer a total power capacity of up to 500 Watts with 50°C working temperature, making it to be perfectly usable in an industrial environment. The power supply is ideally the best choice for server, workstation, communication, or any other automation applications to use. The product also complies with the latest safety and EMC standards, which meet various regulations worldwide. SilverStone’s engineers managed to fit a switch next to the AC receptacle at the rear side of PSU. Concerning the tiny proportions of the unit, even the presence of a switch must have been a design challenge. The tiny 40 mm cooling fan of the PSU covers the rest of the rear side’s surface and is supplied by YS Tech, whose products we frequently encounter into middling-to-premium range PSU products. Any thoughts? If any PSU experts can tell me if the components used are any good? Looks well build to me and they do provide clear images of the internals for people to see. SilverStone supplies the FX500 PSU in a simple cardboard box that is half the size of boxes designed for ATX products. The artwork on the box is simplistic, with a plain blue/white color theme and a picture of the PSU itself on the front side of the box. Inside the box, the PSU is merely wrapped in a bubble bag, with SilverStone betting that its small proportions and low weight are enough to prevent damage during transport. If you choose not to go with the 7660b, you will almost certainly be looking into performing a fan mod on whatever power supply you choose, because nearly every other power supply in the Flex ATX form factor comes with an extremely loud server-grade fan pre-installed. They are LOUD fans, and trust me when I say that this mod is an unavoidable part of building in a case this small unless you go with the 7660b.

I am going to be building a PC with a flex atx power supply. I will be shortening the cables and doing custom sleeves regardless of which psu I choose. I also plan to replace the fan if necessary, and am considering an 80mm fan mod. My question is should I go with this FSP 500w 80+ Platinum OR the FSP 500w 80+ gold? It's a field that SilverStone has become so entrenched in that although other companies produce compact PCs and related peripherals as well, none of them are really trying to be SilverStone's peer. As a result, SilverStone is one of the very few companies with a true variety of small form factor power and cooling solutions, rather than just a token device or two. Even with relatively standard, ATX-compliant equipment, SilverStone’s power products tend to have great power-per-volume ratios. As one of the best-known companies in the high-end PC peripherals business, SilverStone needs little introduction. The company has made a name for itself with its variety of boutique products, especially off-beat and compact designs. And, even though the company has diversified over time into several other segments of the market, their unique cases and assorted power supply units (PSUs) remains their most defining product lines to this day. The platinum model does not have a pcie connector, but I read on a forum that I could convert some of the extra connections into a 6+2 pin. My logic is that I want as little of fan noise as possible, so I would in turn opt for the more efficient PSU. Either way 500w is overkill for my build, but I want the extra wattage for possible upgrades down the line, and to be using a lower percentage of available power, again for fan noise.FSP850-50FGPH3: The FSP850-50FGPH3 is an industrial level of switching power supply and meets 80PLUS Platinum efficiency. The power supply offers a total power capacity of up to 850 Watts, best for AI/GPU server, communication, or any other automation applications to use. The product also complies with the latest safety and EMC standards, which meet various regulations worldwide.

There is only one significantly-sized heatsink inside the PSU, which is used to cool the two transistors that form a typical half-bridge primary inversion stage. The primary APFC capacitor is a 400V/220μF electrolytic capacitor made by Nippon Chemi-Con and is supported by a very sizable coil that takes almost as much volume as the main transformer of the PSU does.For today’s review, we are taking a look at the FX500, a very different PSU than the typical ATX fare that we typically cover. SilverStone’s FX500 is a Flex-ATX format PSU, with the tiny physical proportions that entails, and yet can output up to 500 Watts while meeting 80Plus Gold efficiency standard. Few OEMs– let alone retail companies – bother to develop advanced PSU platforms that are smaller than the full ATX format, making compact PSUs an underserved market. All told, we have seen a few high-end SFX units in the past couple of years, but nothing smaller or even different than that. This makes the the Flex-ATX FX500 a very rare product, as one of the only high-power Flex-ATX PSUs on the market. Power specifications ( Rated @ 40 °C ) I recently build a system in a K39 and by far the most difficult part of the process was settling on a good, affordable power supply that met the needs of my system. I’ve found that the Enhance ENP 7660b is a popular choice for many due to its silence, power, and efficiency. But for those looking to build a more modest system, as I was, I feel that something that powerful and expensive is a bit overkill and defeats the purpose of more budget-oriented sff builds. Inside the box, we found only the basics that come with any retail PC PSU. Altogether, the PSU comes with four mounting screws, an AC power cable, and basic instructional leaflets. There are no cable straps, cable ties, or other accessories of any kind.