Black Fire Cement 1250 C - 310ml for Fireplace, Stove, Boilers etc

Product Information

Do not let any unnecessary putty to dry out on the surfaces of the stove or flue pipe. This excessive fire cement can become incredibly difficult to remove later on. Fire putty is also widely used for sealing against the escape of smoke and flue gases in residential and commercial appliances, such as stoves, chimneys, and central heating systems. How to Use Fire Cement on Flue Pipe? The sealant can withstand temperatures up to 300°C, which makes it the ideal solution to the problems outlined above. Where can you use high temperature silicone sealant?

If you are NOT fitting a liner, but installing a clip-together chimney system (twin-wall), then you will secure your twin-wall adaptor to your vitreous (or to your stove if directly attached) using fire cement or fireproof webbing (webbing is so much neater and more effective). A slight heating up of the installation during 12 hours after application of Firecement HT° will prevent the forming of bubbles and improve the sealant structure. One of the significant benefits of Soudal Firecement HT° is that it does not contain asbestos or any other harmful components. This makes it a safe choice for internal use, giving you peace of mind when applying it in various applications. The absence of hazardous materials ensures a healthier working and living environment, making this fire cement sealant an excellent choice for both professionals and DIY enthusiasts.

What Is Fire Cement Made Of?

Experts recommend using masking tape around the top and bottom of the seal so that a clean straight edge of the heat resistant cement can be applied and exposed to the heat. Open and close the door on a cheap Chinese stove. Then open and close the door on a DG stove, Arada stoves, Woodford stoves, Hamlet stoves or Saltfire stoves. You’ll understand the difference. Sealing of joints and openings where high temperatures are possible: Soudal Firecement HT° is ideal for sealing joints and openings in environments where high temperatures could be encountered.

In the case of porous surfaces, slightly moistening them can improve adhesion. It is always recommended to conduct a preliminary adhesion test on the specific substrate to ensure compatibility and optimal performance.

Fire Rating of 120 minutes (Test Report 7830): Soudal Firecement HT° has a tested fire rating of 120 minutes, demonstrating its exceptional fire resistance and reliability. Curing Time: Allow the sealant to dry and cure according to the manufacturer's instructions. The curing time may vary depending on environmental conditions, but ensure the caulk is fully cured before painting or finishing. Gr8Fires on How this living room was transformed with a media wall featuring the Ezee Glow Celestial Built-In Electric Fire

Ready to use: Soudal Firecement HT° is ready to use straight from the container, eliminating the need for additional mixing or preparation. Apply Consistent Pressure: Apply consistent pressure on the caulking gun trigger to dispense the sealant. Start at one end of the joint or gap and steadily move along its length.The solution to both those problems is silicon sealant, like the Heatmate High Temperature Silicone Sealant we sell. Why use high temperature silicone sealant? Good stuff. Does exactly what it says on the tin, well the tube at least. Easy to apply, and stops all vapour leaks.”– Robert For obvious reasons, you will want to make sure that the stove and flue is correctly sealed before starting to use it. Any gases and smoke produced by your woodburner need to be burnt in the firebox when flammable, then make their way up your flue pipe. Heat Resistant up to 1500°C: This fire cement sealant is specially formulated to withstand extreme temperatures of up to 1500°C, providing reliable heat resistance in demanding applications.