About this deal
Assignable buttons: ABXY, D-pad, LB/RB/LT/RT, M1-M4, LS/RS, view button, menu button, and Screen Shot button. Set TURBO: Hold the TURBO button+the button need TURBO (You need to release TURBO button once to set other buttons); the LED2 will flash twice in orange+the motor shake for 0.2 seconds. Enter Mapping mode: Hold mapping button+M1/M2/M3/M4 to enter the mapping mode and LED2 on the right will breathe in green.
using the old configuration may lead to data confusion and affect the experience, so creating a new configuration is the best choice. FN(MACRO) Button: The main part of ARMORX has 5 setting buttons the button with “FN” words is FN Button which controls MACRO. To make the Armor X enter the upgrade mode, there is a big hexagonal button in the center of Armor X. The connection will failed if not open this setting, because for the Switch the ARMORX is a wired controller.After the wireless adapter connects to ARMORX the LED1 of ARMORX will be always on and the indicator of wireless adapter will be always on with red. Plug the wireless adapter into the Switch. We recommend you use ARMORX under TV mode. If you want to use it under handheld mode please prepare an OTG cable.
Plug the wireless adapter into the USB port of the consoles (For a better signal, we highly recommend you plug the adapter into the front panel). The on-board storage can only save 3 profiles. The APP can save unlimited profiles and you can apply it to the ARMORX Pro in real time.Mapping Button: The main part of ARMORX has 5 setting buttons the button with AB words is Mapping Button. computer with access to the Internet must be prepared, Windows 10 and above systems, desktop computers, or laptops are all available.