ASHATA Solid State Drive Extension Cable for PCI-E 3.0 x4 Full Speed Extension Cable for M.2 NVMe SSD, 20cm M.2 NVMe SSD

Product Information

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below. vmnic4 0000:05:00.1 igb Up Down 0 Half 00:1b:21:93:b3:b3 1500 Intel Corporation 82576 Gigabit Network Connection

My solution at this stage is to use a USB 3.0 to SATA adapter. This is by no means ideal, but it works :)The P14S-P14FP adapter has a Key B interfaces which is available on all 5th gen NUCs. It converts the M.2 slot to a PCIe X4 slot where you can insert your PCIe network adapter. M.2 is also known as Next Generation Form Factor (NGFF). It is a specification for internally mounted computer expansion cards. It is the successor to the mSATA standard, which uses the PCIe Mini Card physical card layout and connectors. M.2 is a very flexible standard that allows different module sizes and various interfaces. As M.2 cards are available in many possible variations, they are divided into different Form Factors and Keys.

The same goes for the latest Wi-Fi 6 and Wi-Fi 6E technologies, the current fastest flavors of Wi-Fi. If you recently bought a new router that supports these standards, you'll certainly want to make sure any range extenders support them as well.When shopping for a range extender, it's important to find one that matches your router's specs. For example, if you have a dual-band AC1900 router, get a dual-band AC1900 extender (or better). If your router supports Multi-User Multiple Input Multiple Output (MU-MIMO) data streaming, which provides enhanced performance by sending data to compatible clients simultaneously rather than sequentially, look for an extender that supports this technology if you want to extend your MU-MIMO network.

There are two types of Wi-Fi range extenders: desktop and plug-in. Most desktop extenders look just like a wireless router and are typically equipped with external adjustable antennas, multiple LAN ports for connecting to devices like TVs and gaming consoles, and USB ports for attaching to peripherals such as storage drivesand printers.In light of this, the (re-) boot time of about two seconds is stunning. Now, this isn’t all just CPU power, the Debian spin is very optimized for this board and has many unnecessary bits removed (which is a must when you’re running on an SD card). So, there’s more than just blazing storage going on here. It’s the combination of lightning-fast storage and, just as importantly, a well-optimized system. The P15S-P15F adapter has a Key E interface which is the second M.2 slot on the NUC5i5MYHE. It converts the M.2 slot to an Mini PCIe slot. (As a side note, I didn't manage to get the P15S-P15F to work in my NUC but I'm currently trying to find out why.) M.2 and PCIe Voltage Issue

Maximum numbers of M.2 SSD support will vary, depending on different CPU specs and PCIe bifurcation settings in different ASUS motherboards. Please see the FAQ link for further information: The adapter (or Extender Board) consists of 2 PCBs that are connected with a flexible flat cable (FFC). You should be aware that it comes without any cases, so you probably have to build your own. Without further modification, the setup is very fragile and looks like that:The slightly older 4th Gen NUCs had a Mini PCIe slot that allowed an additional NIC to be installed. With that port it was possible to install a Syba Mini PCIe NIC for example. Nevertheless the adapter is unsupported with ESXi and did not fit into the NUC chassis, there are solutions. Get the cable out of the NUC. If you have the NUC5i5MYHE, you can remove the serial port bezel and put the cable through.