Aruba Wireless Network Access Point, 802.11ac, Instant Model (IAP-205-US)

Product Information

In Aruba Central, all the LLDP details are supported on APs running Aruba Instant 8.6.0.3 or later versions.

The Network section displays information of the network and interfaces to which the AP is connected. Along with the network profile name, the following fields are displayed in the Network section: Four spatial stream Multi User (MU) MIMO for up to 4.8 Gbps wireless data rate to up to four 1SS or two 2SS HE160 Wi-Fi 6 DL-MU-MIMO capable client devices simultaneously (max) Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.9dBi in 2.4GHz, 4.9dBi in 5GHz and 4.3dBi in 6GHz.

More wireless capacity with ultra tri-band filtering

The device is connected with Aruba Central but the device reachability data for WAN or VPN is not available in Aruba Central, the chart appears in white color. AP-534: Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss Status—Displays the operational status of the radios connected to the AP. The status is as follows: The device is not connected with Aruba Central (the device reachability data for WAN or VPN is not available in Aruba Central), the chart appears in gray color.

When POE power is supplied to both Ethernet ports, the AP can be configured to combine or prioritize power sources Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously The Data Path section displays the topology of the clients connected to each of the radios of the AP, which in turn is connected to switches or gateways through VLAN. When you hover over the upstream device in the data path topology, a pop-up displays the Name, Serial Number, and Port details of the upstream devices.When POE power is supplied to both Ethernet ports, the AP combines power from both sources (SmartPOE feature), using E0 as the primary source and E1 as secondary