Bona Traffic HD Silk Matt 4.5Ltr

Product Information

Bona isn't cheap, but it is well worth the expense and so much better than the standard off the shelf products. Allow at least 3 days for the product to fully cure before laying carpets, rugs and moving furniture.

I tried to use this over some old stairs that had been varnished with a water-based polyurethane a long time ago. Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings, or loading with heavy objects. You can do this by applying a coat of Bona Traffic HD to a pre-prepared area and allowing the coating to set for 3 days. High temperatures and low humidity shorten drying time; low temperatures and high humidity lengthen drying time.The timber ogee edge profile is a classic and elegant design often used in woodworking and furniture making. This profile is known for its smooth, rounded edge that adds a touch of elegance and sophistication to your timber products. An extremely durable two-component floor varnish that meets the highest standard of anti-slip resistance. With its high friction, Bona Traffic HD Anti Slip is an ideal choice for raked stages, treads and ramps especially if water special effects are involved. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product.

With double pencil rounding, both edges of the timber are smoothly and gently curved, creating a harmonious and eye-catching design.Traffic HD also offers a faster development time and floors can go back into use just 24 hours after coating. Traffic provides a clear, natural appearance, giving almost invisible protection when the IP (Matt) version is used.

Floor product is excellent the only down side was the web site calculations of what was actually required to cover the floor was way out,. With double pencil rounding on the thickness, both sides of the timber are expertly curved, creating a visually appealing and harmonious design. Bona Traffic HD is a 2-component waterborne topcoat for surface-treating wooden floors in public areas with high traffic intensity.Widely used in hotels, restaurants and airports, where maximum durability and a short downtime is essential. For maintenance and long term protection of the surface, floors can be overcoated at intervals with additional coats of Bona Traffic HD Anti-Slip. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. If the Bona Traffic finish stays firmly attached to the surface, the adhesion is satisfactory and the main application can begin. For Preparation of previously lacquered floors: Bona Traffic HD Anti-slip has in general very good adhesion to factory pre-finished and previously lacquered floors, but the surface must be carefully cleaned and abraded prior to overcoating.

The result is a sleek and modern appearance that adds depth and dimension to your woodworking projects. EC1RPlus classified for very low emissions (the industry’s most stringent standard on indoor emissions). Its rounded form also adds a comfortable and tactile element to the finished piece, making it a popular choice for handrails and other areas that require a pleasant touch.If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying a final layer of lacquer. Immediately proceed with shaking the mixture for at least a minute, then insert the enclosed filter. Bona Traffic HD is a very tough, hard wearing lacquer for wooden floors in public areas with a high level of traffic.