PC-Products 087770 PC-7 Heavy Duty Permanent Repair Paste Epoxy, 1/2 Pound, Dark Grey

Product Information

I was fixing small tiles to a mannequin so fault on my part for choosing this for this particular fiddly job , as very thick and not that easy to apply without it going everywhere.

The timing of the post-cure is definitely not critical in the same way, for example, that the 'B-stage' is when making the moulds in the first place would, but the post-cure should still be undertaken whilst the resin systems are still continuing to harden. This includes the epoxy pigment pastes, CULR pigments, SHIMR powders and Translucent Tinting Pigments. However, it's important to understand that the percentage of epoxy that's already been used to disperse the pigment is very small, which is why we don't suggest you need to allow for it when calculating your hardener ratio in your resin mix.Some of our most popular shades include: Banana Shake, Cherry, Rich Gold, Bronze, Steel Blue and Aqua Marine. The two parts are differently coloured, simply mix until you can no longer distinguish between the two colours. To mix PC-11® you’ll need a spatula, lolly stick or similar and probably a piece of scrap wood, cardboard or similar to mix on.

With a 3:1 mixing ratio, it has excellent corrosion resistance, is easily machinable and offers excellent mechanical strength. Industrial Metal Rapid 5 Minute is used for the maintenance and repair of pipes, restoring surface profile and improving integrity. Pigment has already been added to the basecoat resin at 10% which is at the upper end of how much pigment can be added to a resin but if you wanted to experiment with making increasing the intensity of the pigment further then you could try adding up to a maximum of an additional 5% by weight of this pigment to the basecoat.

Remove contaminants such as dust, dirt, oil, barnacles and grime with a solvent such as methylated spirit, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner. NACE and CSSW certified technical support for all products with full project support available where required. Concrete substrates shall be sound, clean and free from dust, dirt, grease, oils, laitance and other contaminants.

All you need to do is ensure that when you make the mould, your flanges are big enough to give you room to lay up the bagging stack and have somewhere for the resin feed and vacuum outlet to be positioned. Whilst equal quantities of resin and hardener measured by eye will cure, weighing is preferred as then you are not left with an excess of either resin or hardener: a simple digital scale is recommended. If you have entered an incorrect address, please contact us as soon as possible and we will do our best to change this for you : ) although this is not always possible as we do begin to pack and dispatch items very quickly once they are placed!For repairs to pipework exposed to extreme temperatures in excess of 95°C, please see Titanium Supergrade HT Epoxy Paste. However, for mixing purposes we always recommend adding the pigment to the resin part BEFORE adding the hardener to allow you plenty of time to properly mix, so that means you will just need to plan ahead slightly so you know what your total resin and hardener mix will weigh. We believe in accessibility, so we have an extensive array of products for your convenience and offer a variety of payment options, including Afterpay. Can be used to repair everything from the finest crack in an engine block to a cold weld repair of steel plate. com, the Sell on Etsy app, and the Etsy app, as well as the electricity that powers Etsy’s global offices and employees working remotely from home in the US.