Behringer XENYX 1002B Premium 10-Input 2-Bus Mixer with XENYX Preamps, British EQ and Optional Battery Operation, Black

Product Information

You can connect four stereo sources, as the 9/10 channel has RCA and 1/4" TS jacks - the 'tape input' runs through a proper channel.

The dealer will certainly not help because he made a huge fight to just give me the guarantee that im actually entitled to. Each instrument input can be adjusted with the classic "British-EQ" - three-band equalizer, so that the best sound characteristics of the respective instrument can be emphasized in the overall mix. I've identified two candidates for tapping the direct output, I think just right before the monitor send pot.The Xenyx preamps are much better than we expected, the noise floor is not studio grade but they are very acceptable for live use. The pre-fade MON send allows for pre-fade listening when connected to a headphone splitter such as the ART Headphone Amp. The little mixer is quite straight forward, the mixer uses thee 9volt PP3 batteries, two are used as the supply to the mixer in a 9-0-9 configuration, and the third for the 18v Phantom supply, but no step-up circuit, it uses one of the supply batteries to add to the phantom battery to make the 18v, this I consider a very poor arrangement as it means there is a higher drain on one of the main 9v supply batteries meaning the 9-0-9v will quickly become 9-0-8, then 9-0-7 volts etc etc, and if you have hungry mic’s like mine you will quickly have a lop-sided supply with it’s obvious problems, even when on its original mains PSU the phantom supply is barely 20 volts, but this is academic as I don’t have its original PSU.

Generally, these cookies are only created based on actions you take in response to a service request, such as setting your privacy preferences, logging in, or filling out forms. On my yamaha mixer each of the 3/4, 5/6 stereo sections have RCA red/white sockets at the top of each stereo channel.The only reason I didn't give it a 5 rating is that the battery compartment is only accessible with a screw driver. When DJing with my laptop and presenting karaoke, I have enough inputs that most other cheap boards leave out. Also, the battery compartment cover is not captive, nor is the small Phillips screw that secures the cover. So happy with the rig that I'm adding a second Bose for a truly portable, versatile and powerful PA.

Wish I could easily color-code the sliders (it's in a room that gets used by a lot of different people) but that's hardly a deal-breaker. If you plug 2 jacks into the left and right sockets, then the left one will be routed to the left output only and the right one will be routed to the right output only. The ultra-compact XENYX 1002B mixer’s 10 Inputs (2 mic channels, 4 stereo channels with 3 extra mic inputs) allow you to effortlessly achieve premium-quality sound, thanks to the 2 studio-grade, phantom-powered XENYX Mic Preamps and ultra-musical 3-band “British” channel EQ.and any other laws that direct the application of the laws of any other jurisdictions are expressly excluded. Although some countries use the term "jack" for just about any connector, in the UK its use is restricted primarily to the 1/4" jack plug. Use the included power supply or power the 1002B with 9V batteries for field use (two batteries for normal operation, three to use phantom power).

XENYX mic pres provide such transparent, crystal-clear performance you just might think someone upgraded your mics.Hire this portable battery sound mixer when you need to connect several audio sources for a tourguide transmitter or portable speakers. Likewise, radio and TV reporters especially like the XENYX 1002B for its ease-of-use, remarkable fidelity and rugged reliability. The pan knob now adjusts the balance between the left and right outputs, with the centre position allowing signal to both the left and right outputs. Purchasing a XENYX version when we needed another small analog mixer seemed a no-brainer, but we were concerned the upgrade had "un-graded" all we liked about it. I am not sure what the attachment limit is but I don't think you have enough posts to use it yet Pete.