Fluke Networks MT-8200-60-KIT IntelliTone 200 LAN Toner and Probe Kit

Product Information

A 4-position jack is sure to be telecom service, whereas an 8-position jack could be telecom or data (network) connection. Check telecom services with Line 1 continuity and polarity testing on the IntelliTone Pro 100 and 200 Toners.

Verifying proper routing and termination of this diverse set of cabling types requires tools optimized for different frequencies, connector types, and work environments. Once the cable is located, the IntelliTone Pro 200 LAN probe provides a Cablemap to assure correct pin-to-pin wiring.Telecom Troubleshooting - Check telecom services with Line 1 continuity and polarity testing on the IntelliTone Pro LAN 100 and 200 Toners.

This will aid in differentiating the toned cable or jack from its neighbours by providing a couple of LED levels of difference in strength. Digital and analog tone generator verifies and troubleshoots copper cabling in networks—identifying the type of service and verifying continuity. The SmartTone™ analog mode should be used because of its ability to change cadence when the pair under test is shorted. More recent installations, per the TIA-568 standard, consist of an RJ-45 jack in the office with all 4 pairs punched down on the 110 blocks.MicroScanner2’s smart analog tone eliminates frustrating guesswork locating individual wire pairs during installations by changing songs each time the pair under test is shorted together. In the office, the wall plate jack may be 6 or 8-postion, with the 6-position jack having 4 or 6 pins. The IntelliTone™ Pro LAN Toner uses the unique properties of twisted pair cabling to create a balanced signal that minimizes the effect of signal bleed.

When in tight spaces or in the presence of bleed, the isolate position will help eliminate bleed and provide more granularity on the stronger LEDs. Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Cablemap - The IntelliTone Pro LAN 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. The IntelliTone Pro LAN 200 Toner features a service ID indicating the presence of service on the line.

That means LAN cabling technicians can quickly zero in on the right cable during installations or troubleshooting. This provides telecom technicians a decisive way to identify individual wire pairs before punching them down on a jack or a block, or when diagnosing voice transmission problems. The IntelliTone toner features an 8-position modular jack that accepts 4, 6 or 8 position male plugs. IntelliTone Pro’s SmartTone analogue toning can be used on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring. The advantages on using this kit include overcoming noise, save hours of work time whilst being able to locate cables efficiently and safely, eliminating the need for multiple testing.

Use analogue mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring. The IntelliTone Pro 200 LAN Toner features a service ID indicating the presence of service on the line. Fluke Networks IntelliTone 200 Probe Includes: IntelliTone 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery. Fluke Networks has applied decades of cable test engineering expertise to the science of locating copper cables.IntelliTone 200 LAN Toner and 200 Probe, coax F connector adapter, 2 x RJ11 and 2 x RJ45 patch cables, test leads with alligator clips, 2 x lanyards, quick start guide, 2 x 9 volt batte